SKU: JH5001
Sold Individually

Jackhammer 500W Mono Block Amplifier

Availability: In stock
$359.95 MSRP
$329.95
Built for Bass!! The JH5001 is made for bass with its high efficiency Class D design. Built to produce up to 500 watts at a 1 ohm load, this mono amplifier will make your woofers pound, rattle your windows and let everyone know you're running MTX power.
Ask an expert Find a location

Easy Access Controls

Accessing the fully adjustable gain, low pass filter, subsonic filter and bass boost from the front panel allows for easy adjustment after the unit is installed. This layout is simple and elegant, giving the JH5001 a sophisticated look with the convenience of easy accessibility.

Only What You Need

The JH5001 is designed for one thing, bringing the power to whatever subwoofers you hook it up to. The input section features high quality RCAs for easy connection to after market head units or processors. The Input Level selection is either Pre or Spk In so it can also be used with factory radios that don't have RCA outputs. The Auto Turn On feature is selectable, enabling the unit to turn on when it senses signal, eliminating the need to run a remote wire, or it can be turned on using a remote wire, the choice is yours.

High Quality Power and Speaker Connections

The JH5001 can accept up to a standard 4-gauge power and ground wire for optimal performance. The speaker terminals can accept up to 12-gauge speaker. The speaker connection terminal has two sets of positive and negative terminals for easy wiring, the JH5001 can play loads down to 1Ω. Both sets of connectors use set screw style fittings that ensure proper connection and continual signal transfer.

JACKHAMMER 500W MONO BLOCK AMPLIFIER

BUILT FOR BASS! The JH5001 is made for bass with its high efficiency Class D design. Built to produce up to 500 watts at a 1 ohm load, this mono amplifier will make your woofers pound, rattle your windows and let everyone know you're running MTX power.

Dimensions & Details

Dimensions

  • A - Length:
    7.61" (193.4mm)
  • B - Width:
    8.97" (228mm)
  • C - Depth:
    2.57" (62.2mm)

What's in the Box

  • 5-Channel amplifier
  • External Bass Control (wired remote)
  • 16.5' Wired remote cable (with RJ-25 connectors on one end and 3.5mm mini plug on the other)
  • Four 5/8" Screws
  • Two 1/2" Flat head screws
  • 2mm Allen wrench
  • 4mmAllen wrench
  • Owner's manual (English/ Spanish/ Italian/ French)

SPECIFICATIONS

  • Description: Mono Block
  • Topology: Class D
  • 4Ω RMS Power Output: 225W x 1 Channel
  • 2Ω RMS Power Output: 375W x 1 Channel
  • 1Ω RMS Power Output: 550W x 1 Channel
  • THD: <1%
  • Signal to Noise Ratio: 72dB
  • Frequency Response: 20Hz - 250Hz
  • Crossover: 40Hz to 250Hz, 12dB/Oct
  • Subsonic Filter: 20Hz to 50Hz, 12dB/Oct
  • Bass Boost: 0 - 12dB @ 45Hz
  • Maximum Input Signal: 10V
  • Height: 2.57" (65.2mm)
  • Width: 7.61" (193.4mm)
  • Depth: 8.97" (228mm)
  • Warranty Period: 24 months from date of purchase

Downloads

  • Owners Manual - JackHammer Series Amplifier Owners Manual (36 pages)

Returns & Warranty

30-Day Money-Back Guarantee

At MTX Audio, we are serious about sound®. Therefore, if you are not "blown away" with your purchase, for any reason, you can return any items purchased directly from MTX.com that are complete and like new within 30 days. Products purchased from authorized MTX retailers must be returned through that same retailer. Products purchased through non-authorized MTX retailers may not be returned.

About Returns
Warranty Information

MTX products purchased in the USA from an authorized MTX dealer are guaranteed against defects in material and workmanship for the period of time specified below, the warranty period begins the day the product is purchased by the end user. This warranty is limited to the original retail purchaser of product and extends only to products purchased from authorized MTX resellers. Product found to be defective during that period will be repaired or replaced by MTX at no charge.

About Our Warranty