PTT Digital Microphone Station

IED5401CS

  • Works with 5400 System Only
  • Dante enabled
  • Network Ready
  • PoE enabled
  • Fault Reporting
    DESCRIPTION

    The 5401CS is a push-to-talk switch only digital microphone station.  It is a network appliance with a unique IP address that requires no configuration. Just like AtlasIED’s other digital microphone stations, the 5401CS uses a single Ethernet interface for audio and control data.  The 5401CS is fully compatible with IEEE 802.3af standard for Power over Ethernet (PoE), allowing the microphone station to be powered directly from any standard off-the-shelf PoE switch.

    The 5401CS utilizes Dante™ technology for transporting high-quality, low-latency digital audio over Ethernet. The 5401CS microphone station may be used as part of an EN54-16 listed life safety system; although the mic stations themselves are not EN 54-16 listed and cannot be used for the emergency locations.  Instead, in a dual-use system, these microphone stations may be used for everyday paging functions.


    Features
    • Immediate Digitization of Full Bandwidth Audio
    • Digital Audio Transmission Over Standard Ethernet Connection
    • Mounts Using Standard 1- or 2-Gang Electrical Box
    • Power, Busy, and Ready LED Indicators

    SPECIFICATIONS
    Frequency Response +2dB, -5dB (22Hz - 22kHz, Input Level)
    Total Harmonic Distortion <1.0% (22Hz - 22kHz, Input Level)
    Signal to Noise Ratio >85dB (22Hz - 22kHz, Input Level)
    Sample Rate 48kHz
    Compression Threshold -14dBu
    Operating Temperature Range +32˚F to +104˚F (0˚C to +40˚C)
    Dimensions 4.95" W x 4.95" H x 1.9" D
    Analog-to-Digital Converter, A/D 24 Bit
    Storage Temperature Range –40˚F to +158˚F (–40˚C to +70˚C)
    Supply Voltage 48VDC
    Power Consumption < 4W

    SUPPORT FILES
    5404CS / 5401CS Digital Mic Station Datasheet (2 pages) 5404CS / 5401CS Digital Mic Station Datasheet (2 pages)